{"title":"Boyesen Supercoolers Honda","description":"","products":[{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf150r-07-22-black","title":"Boyesen Supercooler Water Pump KIT HONDA CRF150R 07-22 BLACK","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126173761763,"sku":"BYWPK-09B","price":216.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/wpk-45ab_33273a6d-95ad-444d-bc5c-9789448850d3.jpg?v=1660894696"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf150r-07-22-magnesium","title":"Boyesen Supercooler Water Pump KIT HONDA CRF150R 07-22 MAGNESIUM","description":"\u003cp\u003eThe Boyesen SuperCooler water pump kit is an aluminium investment cast water pump cover and impeller combo; specifically designed to enhance the performance of your engine’s cooling system. This high flow, hydrodynamic water pump kit has been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eInvestment cast aluminium construction\u003c\/li\u003e \u003cli\u003eIncrease coolant flow at all RPM ranges\u003c\/li\u003e \u003cli\u003ePatented nautilus style impeller for hydrodynamic efficiency\u003c\/li\u003e \u003cli\u003eExtends engine life\u003c\/li\u003e \u003c\/ul\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126173860067,"sku":"BYWPK-09M","price":216.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/BYWPKMAG.jpg?v=1660894711"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf150r-07-22-red","title":"Boyesen Supercooler Water Pump KIT HONDA CRF150R 07-22 RED","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126173892835,"sku":"BYWPK-09R","price":225.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/wpk-06cr.jpg?v=1660894725"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf250r-04-09-crf250x-04-18-magnesium","title":"Boyesen Supercooler Water Pump KIT HONDA CRF250R 04-09, CRF250X 04-18 MAGNESIUM","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126173925603,"sku":"BYWPK-07M","price":216.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/BYWPKMAG_7efc3415-f4e2-497a-9d03-8db8dff237e7.jpg?v=1660895636"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf250r-04-09-crf250x-04-18-black","title":"Boyesen Supercooler Water Pump KIT HONDA CRF250R 04-09, CRF250X 04-18 BLACK","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126173958371,"sku":"BYWPK-07B","price":216.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/wpk-45ab_67753cc9-ad8d-4304-a4c7-8ca46454476b.jpg?v=1660894734"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf250r-10-17-black","title":"Boyesen Supercooler Water Pump KIT HONDA CRF250R 10-17 BLACK","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126173991139,"sku":"BYWPK-07AB","price":216.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/wpk-45ab_a04be3d5-ddf2-42a4-9242-9537a89a0267.jpg?v=1660895127"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf250r-10-17-magnesium","title":"Boyesen Supercooler Water Pump KIT HONDA CRF250R 10-17 MAGNESIUM","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126174056675,"sku":"BYWPK-07AM","price":216.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/BYWPKMAG_516365ef-d442-422d-be40-1a23fbf285f0.jpg?v=1660895645"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf250r-10-17-red","title":"Boyesen Supercooler Water Pump KIT HONDA CRF250R 10-17 RED","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126174089443,"sku":"BYWPK-07AR","price":225.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/wpk-06cr_00026c3b-c53e-4d9a-8833-0d92a8355a15.jpg?v=1660894878"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf250r-18-22-crf250rx-19-22-black","title":"Boyesen Supercooler Water Pump Kit HONDA CRF250R 18-26, CRF250RX 19-26 Black","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126174220515,"sku":"BYWPK-07CB","price":216.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/s-l1600_5223a5e7-74b0-41aa-88d2-e2c32fa7b0a1.jpg?v=1660895159"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf250r-18-22-crf250rx-19-22-magnesium","title":"Boyesen Supercooler Water Pump Kit HONDA CRF250R 18-26, CRF250RX 19-26 Magnesium","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126174253283,"sku":"BYWPK-07CM","price":216.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/BYWPKMAG_b636bbed-7349-4e28-80e6-a3537b61e4e5.jpg?v=1660895653"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf450r-02-08-black","title":"Boyesen Supercooler Water Pump KIT HONDA CRF450R 02-08 BLACK","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126174286051,"sku":"BYWPK-06B","price":216.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/wpk-45ab_52dcc34c-437d-4b48-b506-7e0239f30186.jpg?v=1660895177"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf450r-02-08-magnesium","title":"Boyesen Supercooler Water Pump KIT HONDA CRF450R 02-08 MAGNESIUM","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126174318819,"sku":"BYWPK-06M","price":216.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/BYWPKMAG_04ac935b-6ff8-4151-bb3b-2244880982f1.jpg?v=1660895680"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf450r-09-16-black","title":"Boyesen Supercooler Water Pump KIT HONDA CRF450R 09-16 BLACK","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126174351587,"sku":"BYWPK-06AB","price":216.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/wpk-45ab_efba5c77-cbe0-46fb-a90f-d999960dd17f.jpg?v=1660895188"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf450r-09-16-magnesium","title":"Boyesen Supercooler Water Pump KIT HONDA CRF450R 09-16 MAGNESIUM","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126174384355,"sku":"BYWPK-06AM","price":216.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/BYWPKMAG_59b45e09-79c9-4831-8b64-b79931d31e15.jpg?v=1660895693"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf450r-09-16-red","title":"Boyesen Supercooler Water Pump KIT HONDA CRF450R 09-16 RED","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126174417123,"sku":"BYWPK-06AR","price":225.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/wpk-06cr_78b35d00-396c-4aa9-bd42-509499b70c3a.jpg?v=1660894813"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf450r-17-20-crf450rx-17-20-black","title":"Boyesen Supercooler Water Pump KIT HONDA CRF450R 17-20, CRF450RX 17-20 BLACK","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eNew Boyesen Supercooler Water pump Kit in Black to fit:\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHonda CRF 450R 2017-2020\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"collateral-box\"\u003e\n\u003cdiv class=\"head\"\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003cli\u003eAvailable in 3 powder coated colors; Black, Orange or Magnesium\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126174482659,"sku":"BYWPK-06CB","price":204.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/wpk-45ab_17eac574-d357-4087-8d62-d99628f348f8.jpg?v=1660895202"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf450r-17-20-crf450rx-17-20-magnesium","title":"Boyesen Supercooler Water Pump KIT HONDA CRF450R 17-20, CRF450RX 17-20 MAGNESIUM","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126174548195,"sku":"BYWPK-06CM","price":216.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/BYWPKMAG_2d645bdd-3855-4c41-8b1b-e6b1f4fadd42.jpg?v=1660895703"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf450r-17-20-crf450rx-17-20-red","title":"Boyesen Supercooler Water Pump KIT HONDA CRF450R 17-20, CRF450RX 17-20 RED","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126174580963,"sku":"BYWPK-06CR","price":225.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/wpk-06cr_2c3e596c-55a0-4630-9be0-33e9df30b64f.jpg?v=1660894828"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-trx450r-06-09-12-14-4bolt-magnesium","title":"Boyesen Supercooler Water Pump KIT HONDA TRX450R 06-09 + 12-14 (4BOLT) MAGNESIUM","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":43126174613731,"sku":"BYWPK-08AM","price":216.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/products\/BYWPKMAG_aa73ce5b-127d-407f-8ad6-2b2682acccfb.jpg?v=1660895715"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf450r-21-24-crf450rx-21-24-black","title":"Boyesen Supercooler Water Pump KIT HONDA CRF450R 21-25, CRF450RX 21-25 BLACK","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eNew Boyesen Supercooler Water pump Kit in Black to fit:\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHonda CRF 450R 2021-2025\u003c\/li\u003e\n\u003cli\u003eHonda CRF 450RX 2021-2025\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"collateral-box\"\u003e\n\u003cdiv class=\"head\"\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003cli\u003eAvailable in 3 powder coated colors; Black, Orange or Magnesium\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":44015712993507,"sku":"BYWPK-06DB","price":216.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/files\/BYWPK-06DB.jpg?v=1696185886"},{"product_id":"boyesen-supercooler-water-pump-kit-honda-crf450r-21-24-crf450rx-21-24-magnesium","title":"Boyesen Supercooler Water Pump KIT HONDA CRF450R 21-25, CRF450RX 21-25 MAGNESIUM","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eNew Boyesen Supercooler Water pump Kit in Magnesium to fit:\u003c\/span\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHonda CRF 450R 2021-2024\u003c\/li\u003e\n\u003cli\u003eHonda CRF 450RX 2021-2024\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"collateral-box\"\u003e\n\u003cdiv class=\"head\"\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature. Boyesen’s SuperCooler™ kit uses a patented impeller design to protect vulnerable engine components. A 26% flow increase over stock lets you run cooler, run faster and moto longer. More flow means supercooled engine protection and maximum horsepower!\u003c\/p\u003e\n\u003cp\u003eBoyesen SuperCooler™ Water Pump Cover and Impeller Kits are specifically designed to enhance the performance of your machine’s cooling system. These high-flow, hydrodynamic water pump kits have been tested and designed to flow more coolant. By increasing the flow, the engine will run cooler at a more constant temperature.\u003c\/p\u003e\n\u003cp\u003eInternal engine heat, although needed for horsepower, is also extremely destructive to your engine if it is not managed properly. Internal-combustion engines burn fuel hotter than the melting temperature of engine materials. When an engine is operating out-of-balance with its cooling system’s capacity, the internal temperatures often rise to levels that cause damage to the cylinder, piston, and valve-train components. If these parts become heated over the optimal operating upper limit range, component damage will begin to occur. Reduced to its common reasons for being essential in an internal combustion engine, cooling system efficiency can have a dramatic influence on the longevity of the internal working components of your bike’s engine. These include the reduction of thermal stresses and strains causéd by pre-ignition and detonation (particularly the latter), distorted cylinder bores, potential damage to pistons and rings, and damaged valve-train components.\u003c\/p\u003e\n\u003cp\u003eHYDRODYNAMIC EFFICIENCY\u003cbr\u003eThe Boyesen Supercooler will reduce engine temperatures by as much as ten degrees, as confirmed by Boyesen’s coolant-flow Dyno testing. How does the Supercooler achieve this? Hydrodynamics. Boyesen’s investment-cast aluminum water pump cover has bigger water inlets, a sculpted design, no casting seams, less restrictive corners, a more efficient impeller and less coolant cavitation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Nautilus style cast aluminum impeller\u003c\/li\u003e\n\u003cli\u003eIncreased coolant flow at all RPM ranges\u003c\/li\u003e\n\u003cli\u003eReduces cavitation and hydraulic friction\u003c\/li\u003e\n\u003cli\u003eSeamless Hydrodynamic design\u003c\/li\u003e\n\u003cli\u003eHigh capacity inlets\u003c\/li\u003e\n\u003cli\u003eAvailable in 3 powder coated colors; Black, Orange or Magnesium\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Boyesen","offers":[{"title":"Default Title","offer_id":44015713976547,"sku":"BYWPK-06DM","price":216.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0254\/5123\/files\/BYWPK-06DM.jpg?v=1696186003"}],"url":"https:\/\/www.poaracing.co.uk\/collections\/boyesen-supercoolers-honda.oembed","provider":"POA Racing Ltd","version":"1.0","type":"link"}